TDC 17 Led & Halogen Lighting Dimmer

The dimmer module, which is prepared to adjust the light intensity of filament halogen fixtures and led fixtures, allows you to easily adjust the light intensity of the lighting fixtures with a pushbutton (N.O.) positioned in one or more places or a potentiometer.

3 tasks are loaded on the push button that you will connect to the control input with the microcontroller in the module.

LOCATION 1: Illuminations are in the Default OFF state. There is no memory function in this module and the lights stay in the OFF state in case of power cuts.

LOCATION 2: When the push button is pressed once, the illuminations are turned on at FULL light level. When the push button is pressed once again, it switches to position 1 which is OFF.

LOCATION 3: When the Push button is pressed for a long time in any position, the light level starts to change. You can remove your hand from the Push button when the illumination reaches a sufficient level. Press the Push button again to turn off the illumination.

Supply Voltage Range : 11…30 Volt DC

Maximum Load (Positive Dimm): 12 Volt=100 Watt 24 Volt=150 Watt

Dimmable Loads: Filament and halogen luminaires, dimmable led luminaires (without driver)

Dimming Tools : N.O. Push button / 1Kohm potentiometer

Dimming Value: 5%…99%

Dimm Function: Off/On/Light adjustment when the button is pressed

Dimensions: e.35 X b.53 X d.40 mm

Weight : 78 g